Rain Sensor Connection - Rain TBO Instrucciones

RAIN S.p.A.
via Kennedy 38/40
20023 Cerro Maggiore
ITALY (MI)

5. RAIN SENSOR CONNECTION

A mechanical rain sensor can be connected to the TBD. Its purpose is to arrest
the irrigation when the rain falls down.
1. Cut off the red cable approximately halfway of the ring.
2. Strip around 15 mm of insulation from the ends of each cable. Connect both
ends of the red cable to each one of the two rain sensor wires.
3. Use waterproof connectors to make cable couplings
Note: TBD is compatible with all rain sensors that work with "normally closed"
contact.