Tripp-Lite B127P-002-H El Manual Del Propietario página 7

Standard Extender/Splitter Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a higher gauge size like
26 AWG, will result in a shorter extension distance since the cable will have a
more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are
made with 24 AWG solid-wire cabling.
3) The installation diagram shows the B127P-004-H local transmitter unit. The
B127P-002-H installation is the same, except there are only two remote ports
and no local port monitor.
4) External power is not required for the B127P-100-H and B127P-100-H-SR units
due to Power over Cable (PoC) technology incorporated in the transmitter units.
B127P-004-H extender kit
1
Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz
2
Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz
OPTIONAL
LOCAL MONITOR
3
Up to 15 ft. (5 m) HDMI 2.0 cable at 4K/60Hz
4
Up to 16 ft. (5 m) HDMI 1.4 cable at 1080p/60Hz
B127P-100-H
B127P-100-H
B127P-004-H
HDR PLAYER
7
B127P-100-H-SR
B127P-100-H-SR