ASROCK Fatal1ty 990FX Professional Serie Manual De Instrucciones página 34

HDMI_SPDIF Header
(2-pin HDMI_SPDIF1)
(
see p.4 No. 1)
Front USB 3.0 Panel Installation Guide
Step 1
Prepare the bundled Front USB 3.0
Panel, four HDD screws, and six
chassis screws.
Intall the Front USB 3.0 Panel into
Step 3
the 2.5" drive bay of the chassis.
Plug the Front USB 3.0 cable into
Step 5
the USB 3.0 header (USB3_1_2 or
USB3_3_4) on the motherboard.
34
Fatal1ty 990FX Professional Series Motherboard
HDMI_SPDIF header, providing
SPDIF audio output to HDMI
VGA card, allows the system to
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Screw the 2.5" HDD/SSD to the Front
Step 2
USB 3.0 Panel with four HDD screws.
Screw the Front USB 3.0 Panel to
Step 4
the drive bay with six chassis screws.
The Front USB 3.0 Panel is ready
Step 6
to use.