ASROCK Fatal1ty 990FX Professional Serie Manual De Instrucciones página 43

4. Click the Create Team tab.
* The Create Team tab appears only if there are teamable adapters available.
5. Click the Team Name eld to enter a team name.
6. Click the Team Type eld to select a team type.
7. Assign any available adapter or adapters to the team by selecting the adapter
from the Load Balance Members list. There must be at least one adapter
selected in the Load Balance Members list.
8. You can assign any other available adapter to be a standby member by selecting
it from the Standby Member list.
* There must be at least one Broadcom network adapter assigned to the team.
The Large Send Of oad (LSO), Checksum Of oad (CO), and RSS indicate if
the LSO, CO, and/or RSS properties are supported for the team. The LSO, CO,
and RSS properties are enabled for a team only when all of the members
support and are con gured for the feature.
* Adding a network adapter to a team where its driver is disabled may negatively
affect the of oading capabilities of the team. This may have an impact on the
team's performance. Therefore, it is recommended that only driver-enabled
network adapters be added as members to a team.
Fatal1ty 990FX Professional Series Motherboard
43