Descargar Imprimir esta página

Vehicle Preparation; Installation Procedure - Mopar 82211442 Serie Instrucciones De Instalación

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Lower one or more of the passenger windows so the keys do not get locked in the
vehicle.
2. Disconnect and isolate the negative battery cable. The battery will need to be
re-connected before programming.
3. Locate and cut provided new keys prior to remote start installation.
TOOLS REQUIRED
KIT CONTENTS
1X
2X
This instructional manual will discuss the installation of the hood switch harness & XBM
(Remote Start) turn-on. Other steps will include replacement procedure of the WCM, an-
tenna installation, hood switch installation, and uploading of vehicle configuration from
Dealer Connect. Refer to the vehicle Service Manual for specific installation procedures
for all components except the hood switch harness, which is covered here in detail.
Hood Switch and Striker Plate Installation
1. Refer to the vehicle Service Manual section 8 Electrical/
Vehicle Theft Security/Hood Ajar Switch/Installation - for Hood
Switch installation.

VEHICLE PREPARATION

10mm
15mm
13mm
12X
1X
2X
1X

Installation Procedure:

1/4"
2X
OVERVIEW
2 of 9
T-20
1X
1X
1X

Publicidad

loading