Installing Windows - ASROCK Fatal1ty P67 Performance Serie Manual De Instrucciones

2.9 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.10

Installing Windows

64-bit / XP / XP 64-bit With RAID Functions
If you want to install Windows
bit on your SATA / SATAII / SATA3 HDDs with RAID functions, please refer to the
document at the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.11 Installing Windows
/ XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.11.1 Installing Windows
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII / SATA3 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE].
STEP 2: Install Windows
30
Fatal1ty P67 Performance Series Motherboard
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista
® 7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit OS on your SATA / SATAII / SATA3
Advanced screen
®
XP / XP 64-bit OS on your system.
TM TM
/ Vista
TM
/ Vista 64-bit / XP / XP 64-
TM TM
/ Vista 64-bit / XP
TM
/ Vista 64-bit / XP / XP 64-
Storage Confi guration.