Cisco Systems Linksys WRE54G Guía De Instalación Rápida página 2

Before you begin installation of the Range Expander, make sure your
wireless network is operational.
If your existing wireless network has security disabled, follow the instructions
in Step 1: Connecting the Range Expander and Step 2: Using the Auto
Configuration Button.
If your existing wireless network has security enabled, follow the instructions
in Step 1: Connecting the Range Expander and Step 3: Using the Setup
Wizard.
1
Connecting the Range Expander
A
For best results, connect the
Range Expander to a wired
network for setup. First, flip up
the lid covering the Ethernet
network port on the Range
Expander's front panel. Then,
connect the Ethernet network
cable to the Range Expander
and your router. Proceed to
step B.
If, however, you prefer to use
the Auto Configuration button,
place the Range Expander
next to your wireless router or
access point. Then proceed to
step B.
B
Connect the appropriate
power plate to the Range
Expander, and then plug it into
a power outlet, preferably a
surge protector.
If your existing wireless network
has security disabled, proceed
to Step 2: Using the Auto
Configuration Button.
If your existing wireless network
has security enabled, proceed
to Step 3: Using the Setup
Wizard.
2
B
The wall mount Power
NOTE:
Plate is only included for regions
with EU or US style power plugs.
OR