Operating Instructions - Avanti CTW14X0W-IS Manual De Instrucciones

PRESS THE POWER BUTTON.
PRESS THE LOAD SIZE BUTTON.
Choose appropriate water level according to wash load quantity.
(In SPEED WASH program, the water level cannot be selected)
WATER TEMPERATURE CHOICE.
Press and hold the load size button for approximately 3 seconds and, you can choose from cold,
warm, and/or hot water.
Indicator
Light Shown
C Cold Water
H Hot Water
CH Warm Water
NOTE: The washer will provide a cold rinse in all temperature settings.
PRESS THE PROGRAM SELECTION BUTTON.
Choose the desired function and then the corresponding indicator blink.
1 NORMAL
2 COTTON ** DEFAULT **
3 GENTLE WASH
4 SPEED WASH
Water Level
Program
Default
Setting
NORMAL MEDIUM
COTTON MEDIUM
GENTLE MEDIUM
SPEED SMALL
WASH
SPIN -
WHITES MEDIUM
HEAVY MEDIUM
SOIL
TUB LARGE
CLEAN
NOTE: All automatic wash programs include soak time.
To select one of the pre-programmed automatic wash cycles, follow the instructions as shown
below:
·
Close the lid.
·
Press the power button.
·
Press the program button to select the appropriate program until the program number is
shown in the display window. (Cotton is the default program)
·
For routine / normal washing it is recommended to use the NORMAL program and only use
the HEAVY SOIL setting for large loads or when washing items that are excessively soiled.
·
Press the Load size button to select the appropriate load size. (The default is 2 Medium).
·
Press the START/PAUSE to start the cycle. And the LED display will show the remaining time of
the entire course.

OPERATING INSTRUCTIONS

AUTOMATIC WASH PROGRAMS
Wash
Time
Available
(Approx)
Settings
S, M, L 15
S, M, L 11 – 15
S, M, L 9 – 13
S, M, L 6 – 8
- -
S, M, L 9 -13
S, M, L 15 – 19
LARGE 28
17
1
2
3
Description
5 SPIN ONLY
6 WHITES
7 HEAVY SOIL
8 TUB CLEAN
Final
Rinse
Spin
Times
Time
1 9
2 7
2 5
1 5
- 7
2 5
2 7
1 5
SMALL
MEDIUM **DEFAULT **
LARGE
Total Delay
Time Start
(Approx) Option
33 YES
38 -42 YES
34 – 38 YES
21 – 25 YES
7 NO
32 – 36 YES
42 – 46 YES
43 NO