Technical Specification; End Of Program - Beko DV 1160 Manual Del Usuario

Ocultar thumbs Ver también para DV 1160:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

deactivated. To deactivate the childproof lock,
press the same buttons for 3 sec.
C
One of the LEDs on the program follow-up
indicator starts flashing when the child-proof
lock is activated.
Ending the program through
canceling
The program which is selected first will keep
on going even if the position of the program
selection button is changed. A new program
can be selected and started after "Program
cancel" is activated in order to change the
drying program.
To cancel any selected program;
Press "Start/Pause/Cancel" button for
about a duration of 3 seconds. The "Filter
cleaning" and "Water tank" warning LEDs
as well as the "0" warning LED on the
program follow-up indicator will light up
at the end of this period for reminding
purposes.
A
As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
activate the ventilation program to cool it
down.

Technical Specification

EN
Height (adjustable)
Width
Depth
Capacity (max.)
Weight (net)
Voltage
Rated power input
Model code
Type label is located behind the loading door.
This appliance's packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose. Your appliance also
contains a great amount of recyclable material. It is marked with this label to indicate the
used appliances that should not be mixed with other waste. This way, the appliance recycling
organised by your manufacturer will be done under the best possible conditions, in compliance
with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact
your town hall or your retailer for the used appliance collection points closest to your home. We
thank you doing your part to protect the environment.
To start a new
program after the
program is over or to
interrupt the program,
the childproof
lock should be
12 - EN
A
If the machine is stopped during
any drying program, and if the position of
the program selection knob is changed,
an audio signal will be heard (if the "Cancel
audio warning" function is not selected).
The machine will not start even if the "Start/
Pause/Cancel" button is pressed, unless
the program selection knob is returned to
the initial program. The paused program
must be cancelled in order to change the
drying program.

End of program

The "Filter cleaning" and "Water tank" warning
LEDs as well as the "0" warning LED on the
program follow-up indicator will light up at the
end of the program. The door can be opened
and the machine becomes ready for a second
cycle.
Press the "On/Off" button to shut down the
machine.
C
A 2-hour anti creasing program to prevent
laundry from creasing will be activated if
you do not take the laundry out after the
program has come to an end.
C
Clean the filter after each drying (please
see, Filter cleaning).
C
Drain the water tank after each drying
(please see, Water tank)
2
85.0 cm
59.5 cm
54 cm
6 kg
31 kg
See type label

Publicidad

Tabla de contenido
loading

Tabla de contenido