Power Linking - Chauvet SlimPACK 56 LT Guía De Referencia Rápida

SlimPACK™ 56 QRG
Obey™ 3
Overview
AC Power

Power Linking

Fuse
Replacement
(SlimPAR™ 56
only)
Macro Button
Chases Button
Preset Button
Power On/Off
Switch
The SlimPAR™ 56 has an auto-ranging power supply that can work with an
input voltage range of 100~240 VAC, 50/60 Hz.
The Obey™ 3 runs on a 12 VDC, 500 mA external power supply.
You can link up to 50 SlimPAR™ 56 units at 120 VAC, and 100 units at 230
VAC. You should never exceed this number.
1. Disconnect this product from the power outlet.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder
and pry the safety cap out of its housing. The safety cap will pull the
installed fuse with it.
3. Remove the blown fuse from the safety cap and replace with a fuse of the
exact same type and rating.
4. Insert the fuse holder back in its place, and reconnect power.
Chases/Macro/Red Fader
12 VDC Input
4
Sound Sensitivity
Adjustment Knob
Strobe Button
Blackout Button
Manual RGB Button
Sound Button
Master Dimmer/Blue Fader
Fade/Speed/Strobe/Green Fader
Back Panel
DMX Out
EN