Ezviz X3 Guia De Inicio Rapido página 6

Operations
Step 1
Installing 2.5-inch HDD
If the product you purchases has a built-in HDD, skip this step.
1
Loosening the Screws
Loosen the 4 screws on the base of the X3 with a screwdriver, as shown in the
figure below:
The No.1 screw is behind the label. Tear off the lable, you can see the No. 1
screw.
2
Opening the Cover
Open the cover at the groove according to the direction of arrow, as shown in the
figure below:
1