Cleaning And Care; Safety Advice - AEG SB29 Serie Manual De Instrucciones

11
Attach the chopper blades (M) on the chopper base shaft (L) by pushing it down until the blades click into posi-
tion. Fill the ingredients in the chopper jar (N). Attach the chopper base (K) on the chopper jar by turning it clockwise
until the chopper jar clicks into position.
12
Turn the chopper upside down. Push down the chopper into the blender base (E) and rotate it clockwise to lock.
Note: When locked, the symbol
Caution! To reduce risk of injury, never place the blade assembly on the base without the chopper jar properly at-
tached.

CLEANING AND CARE

13
Unplug the appliance. Accessories are dishwasher safe, except for the blender blade assembly (C), the grinder blade
assembly (H*) and the chopper base (K*). Let all parts dry thoroughly.
Caution! The blades and inserts are very sharp!
14
Clean the blender base with a damp cloth.
Caution! Never immerse the blender base in water!
Do not use abrasive cleaners or scouring pads when cleaning the appliance.
15
Available optional accessories: Extra bottles ASBEB1, ASBEB2.
Enjoy your new AEG product!

SAFETY ADVICE

Read the following instruction carefully before using the appliance for the first time.
• This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children. Appliances can be used by persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and if they
understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• The appliance may only be connected to a power supply whose voltage and
frequency comply with the specifications on the rating plate!
• Never use or pick up the appliance if:
– the supply cord is damaged,
– the housing is damaged.
• If the appliance or the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person, in order to avoid hazard.
• Always place the appliance on a flat, level surface.
• Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling or cleaning.
• Do not immerse the appliance in water or any other liquid.
• Do not let cord hang over edge of table or counter, do not let cord contact hot
surface, including the stove.
• Never use accessories or parts made by other manufactures not recommended or
sold; may cause a risk of injury to persons.
• Make sure the motor has completely stopped before disassembling and cleaning.
• Avoid contact with moving parts. Contact could result in injury!
• The blades and inserts are very sharp! Danger of injury! Caution when assembling,
disassembling after use or when cleaning! Ensure that the appliance is disconnected
from the mains supply.
www.aeg.com
SB29xx_Sportblender_AEG NO-FARSI CS6.indd 7
on the chopper base should be aligned with the symbol on the blender base.
GB
DE
AR
ES
FR
GR
IT
NL
PT
7
17.07.17 23:34