Attaching The Cables; Attaching The Transport Handle - Stihl MH 710 Manual De Instrucciones

English
6.6

Attaching the Cables

Attaching the self-propulsion cable
► Insert self-propulsion cable (1) through
lever (2).
► Fit washer (3).
► Screw on nut (4).
► Attach spring (5) to holder (6).
Attaching the reverse gear cable
► Attach reverse gear cable (7) to holder (8) and
holder (9).
Securing the throttle cable
► Secure throttle cable (10) using cable clip (11).
Securing the cable
► Secure cable (12) using cable clip (13).
12
► Secure cable conduit (14) with cable clip (15).
6.7

Attaching the Transport Handle

► Unscrew nuts (1) and remove washers (2) and
bolts (3).
► Discard nuts (1) and bolts (3).
Reuse washers (2) when attaching the transport
handle.
► Hold transport handle (4) against bracket (5)
so the front bores align.
► Insert bolts (6).
► Fit washers (2).
► Tighten nuts (7) to 35 Nm to 40 Nm.
Transport handle (4) is locked in place.
6 Assembling the Cultivator
0478-404-9905-B