Setting The Language, Date And Time; Selecting The Language - Tascam Mixcast 4 Manual Del Usuario

Open the SD card slot cover on the back and insert the card in the slot
until it clicks into place.
If a pop-up message suggesting formatting appears on the touchscreen
when an SD card is inserted, follow the instructions in the message to
format the card.
NOTE
SD cards formatted by this unit are optimized to improve performance
during recording. Use this unit to format the SD cards to be used with
it. Errors might occur when recording with this unit using an SD card
formatted by a computer or other device.
ATTENTION
Formatting an SD card will erase all the data on it. Make a backup of
any needed data before formatting.
Removing SD cards
First, turn the unit off or stop operation. Then, gently press the SD card in
to eject it, and remove it
ATTENTION
Never remove an SD card when the unit is operating (including re-
cording, playing back, or writing data to the SD card). Doing so could
cause proper recording to fail, data to be lost, and sudden loud noises
from monitoring equipment, which might damage the equipment,
harm hearing or cause other trouble.

Setting the language, date and time

The Others Screen will open the first time the unit is turned on after pur-
chase and whenever the internal clock has been reset.
Others Screen
p English is the default display language.

Selecting the language

Select the language to use for menus and messages with the Language
item on the Others Screen.
Others Screen
Options
English: Use English (default setting)
日本語:
Use Japanese
Français:
Use French
Español:
Use Spanish
Deutsch:
Use German
Italiano:
Use Italian
Русский язык:
Use Russian
中文:
Use Chinese
한글:
Use Korean
Setting the date and time
1. On the Others Screen, tap the Date/Time Adjust button to open the
Date Time Adjust Screen.
Others Screen
2. Swipe the date and time items up and down to set them.
Date Time Adjust Screen
3. After completing the settings, tap the OK button.
11
TASCAM Mixcast 4