Condensate Drain Connection - Energy SHP-130 Instrucciones Para La Instalación, El Uso Y El Mantenimiento

- Condensate drain connection

Connection of the condensate drain depends on the
type of machine installation (ceiling or wall).
Connect the condensate drain to the domestic sewage
system using a duct or pipe (siphoned).
To prevent suction or emptying of this drain,
the height of the siphon must not be less than 100mm.
The machine is supplied with a section of flexible
corrugated condensate drain pipe, 800 mm long,
pre-assembled with a 90°C bend coupling (see Fig.2).
The component facilitates the connection in the event
of horizontal installation and allows the siphon to be
fitted with iron wire support.
Attention: the impropre installation of the
unit and the incorrect connection of the
condensate drain pipe can hinder the re-
quired condensate drainage with its consequent
leackage.
Connections must only be carried out by qualified
personnel to avoid damage or injury
(Fig. 2)
Ø int. 15 mm
Y
English
800
69