GYS STARTPack PRO 12.24 Manual Del Usuario página 9

Use in STARTER mode
• Unplug the socket from the mains.
STARTPACK PRO 12.24 only:
• Disconnect the voltage selector
• Turn the battery-switch on OFF.
• Plug the red clamp to the (+) and the black clamp to the (-).
NB: In the event of polarity inversion, STARTPACK PRO 12.24 indicates red
LED lighting + alarm sound.
STARTPACK PRO 12.24 only:
• Connect the voltage selector on 12V or 24V depending on the the vehicle you
wish to start.
• Turn the battery switch to ON
• Turn the key of your vehicle in order to activate the starter function
NB : if the vehicle does not start, wait 3 minutes between two attempts.
A vehicle which does not start after the third attempt probably has a problem
unrelated to the battery: alternator, spark plug,...
• Once the vehicle starts, turn the battery switch on OFF.
After a start or a high consumption of batteries, the red light will flash to
warn you that internal batteries should be recharged. This doesn't mean that
you can't try to start other vehicle.
STARTPACK PRO 12.24 only:
• Disconnect the voltage selector from the 12V or 24V socket.
• Unplug the black clamp then the red clamp from the vehicle.
• Connect the device on a 230V 50/60Hz socket to recharge the batteries.
9