Setting Up The Device; Exploded Drawing/Spare Parts List - SPORTSTECH F31 Manual De Usuario

Ocultar thumbs Ver también para F31:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
0,3 m
1 m
1 m
2 m
DANGER:
While you program the device and engage in any other preparations, never stand on the
running belt. Always use the side treads instead.
Never operate the device at high speed and never try to jump onto the running belt after-
wards. Always increase speed gradually.

EXPLODED DRAWING/SPARE PARTS LIST

SETTING UP THE DEVICE

Set up the device on a level surface and pay attention to the surrounding clear
space:
1. There must be at least 2 meters of free space at the rear of the device.
2. There must be at least 1 meter of free space on both sides of the device.
3. There must be at least 30cm of free space at the front of the device to allow
the device to be folded up and the power cord to be routed safely.
Do not place the device in front of fume cupboards or ventilation systems.
Do not use the device in a garage, covered courtyard, near water, or outdoors.
At the following link
At the following link
you will find the exploded drawing
you will find the exploded drawing
and the spare parts list:
and the spare parts list:
https://service.innovamaxx.de/f31_spareparts
https://service.innovamaxx.de/f31_spareparts
24

Publicidad

Tabla de contenido
loading

Tabla de contenido