Troubleshooting; Electric Griddle Plate; Replacing Components; Reminders For Replacing Components - KBS DPBE40LC Instrucciones Para Instalación, Uso Y Mantenimiento

ELECTRICAL APPLIANCES
Switch on the appliance as directed in the
instructions and reminders for use given in
Chapter " INSTRUCTIONS FOR USE " and
check:
• the current values of each phase.
• the correct operation of the heating ele-
ments.
15

TROUBLESHOOTING

ELECTRIC GRIDDLE PLATE

The appliance does not heat.
Possible causes:
• Temperature thermostat defective.
• Heating elements defective.
• Safety thermostat tripped.
Heating cannot be adjusted.
Possible causes:
• Temperature thermostat defective.
16

REPLACING COMPONENTS

REMINDERS FOR REPLACING COMPO-
NENTS.
• Disconnect the appliance electrical power
supply, if present, before proceeding with
any operation.
• After replacing a gas system component,
check for gas leaks at connection points.
• After replacing an electrical system com-
ponent, check it is correctly wired.
ELECTRIC GRIDDLE PLATE
Replacing the heating element and the
indicator light.
• Remove and replace the component.
• Re-assemble all parts. For assembly, pro-
ceed in reverse order.
Replacing the working thermostat and
safety thermostat.
• Remove the bulb from its seat on the bot-
tom of the hotplate.
• Remove and replace the component.
10
• Insert the bulb properly in its seat on the
bottom of the hotplate.
• Re-assemble all parts. For assembly, pro-
ceed in reverse order.
17

CLEANING THE INTERIOR

• Check the condition of the inside of the ap-
pliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust sy-
stem.
18

MAIN COMPONENTS

ELECTRIC GRIDDLE PLATE
• Working thermostat
• Safety thermostat
• Heating element
• Indicator light.