Headphone Jack - Peavey MAX Serie Manual De Operación

®
Front Panel MAX 126
1 2
INPUT JACK
1
Plug your bass into this 1/4" jack. Connect your bass prior to turning on the power switch.
VINTAGE
2
This control introduces patented Peavey TransTube
of a vintage tube bass amp. Increase the amount of "tube like" distortion/compression by turning the
knob clockwise.
VINTAGE ON/OFF
3
This push button switch allows you to turn the Vintage control on and off.
GAIN
4
This control sets the overall volume level of the MAX 126.
HIGH EQ
5
This control allows you to dial in high frequencies or "treble" sounds for your bass.
LOW EQ
6
This control adds bottom end to your sound. Use this control for low sounds or to add more "oomph"
to your bass.
AUX/LINE IN
7
This standard 1/4" input jack allows you to connect a tape or CD player to your MAX 126 and play
along.

HEADPHONE JACK

8
This standard 1/4" input jack allows you to connect standard headphones to the MAX
Vintage and Gain controls all the way down before using headphones. Slowly turn up the volume and find
a comfortable listening level. When headphones are connected to the MAX 126‚ the speaker is automati-
cally turned off.
POWER LED
9
This LED illuminates when power is supplied to the MAX 126.
POWER SWITCH
10
This two-way rocker switch applies power to the unit when placed in the ON position.
4
3 5
6 7
circuitry, with an EQ curve that simulates the sound
®
8
9
126. Turn the
®