ASROCK FM2A75 Pro4-M Manual De Instrucciones página 32

2.8 Driver Installation Guide
To install the drivers to your system, please insert the support CD into your
optical drive first. Then, the drivers compatible to your system can be auto-
detected and listed on the support CD driver page. Please follow the order
from top to bottom to install those required drivers. Therefore, the drivers
you install can work properly.
2.9 Installing Windows
With RAID
If you want to install Windows
SATA3 HDDs with RAID, please refer to the document at the following path
in the Support CD for detailed procedures: ..\ RAID Installation Guide
2.10 Installing Windows
Without RAID
If you want to install Windows
your SATA3 HDDs without RAID, please follow the steps below.
Using SATA3 HDDs with NCQ
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
Configuration.
B. Set the option "SATA Mode" to [AHCI].
STEP 2: Install Windows
your system.
32
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
Advanced screen
®
7 / 7 64-bit / Vista
ASRock FM2A75 Pro4-M Motherboard
TM TM
/ Vista 64-bit
TM TM
/ Vista 64-bit on your
TM TM
/ Vista 64-bit /
TM TM
/ Vista 64-bit OS on
Storage
TM TM
/ Vista 64-bit OS on