Wall Mounting - Zyxel NWA3550 Guia De Inicio Rapido

3 Adjust the NWA3550, cables and antennas for correct
orientation.
4.1.4 Wall-mounting
1 Select a position free of obstructions on a sturdy wall.
2 Position the wall/pole bracket on the wall to mark how far apart the screws should be
placed. Drill four holes for the masonry plugs.
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Insert the masonry plugs into the wall.
The included screws and masonry plugs are intended primarily for use with
concrete walls. You may need to use different screws and plugs, depending
on your wall's material.
4 Align the mounting bracket with the holes
on the rear of the NWA3550. Insert four
M5*12 screws into the holes and use a
wrench to tighten the screws with the M5
washers.
ENGLISH
14