Zyxel NWA-3166 Guia De Inicio Rapido página 10

RTS/CTS Threshold: Sends an RTS for all packets larger than the number (of
bytes) that you enter here. If you are not sure, leave it as the default.
Fragmentation Threshold: Enter an even number between 256 and 2346. This is
the maximum data fragment size that can be sent. If you are not sure, leave it as the
default.
Beacon Interval: Enter a value from 30ms to 1000ms. This tells receiving devices
on the network how long they can wait in low-power mode before waking up to
handle an incoming beacon. If you are not sure, leave it as the default.
DTIM: Enter a value from 1 to 100. This is the time period after which broadcast and
multicast packets are transmitted to mobile clients in the Active Power Management
mode. If you are not sure, leave it blank.
Output Power: Select the relative strength of your NWA's broadcast output. If the
area in which it is located has a high number of APs, reduce the output power to
reduce interference from those other devices. Reducing the output power similarly
reduces the broadcast radius.
SSID Profile: Select the SSID profile you want to configure for network access from
the drop-down list box. This example uses the SSID03 profile.
2 Click Apply to save your settings.
3 Click the SSID tab. The
following screen appears.
Ensure the settings for
SSID03 are at their default
values.
The default SSID (the
name of the network) is
ZyXEL03, its default
Security setting is
Security01. Layer 2
Isolation and MAC Filter
are set to Disable by
default.
If you want to change the
SSID profile's settings,
select SSID03 and click
Edit.
ENGLISH
10