Promise Technology VTRAK E-Class E830f Guia De Inicio Rapido página 10

VTrak E-Class Quick Start Guide
Figure 7. Drive carrier side view
5. Insert the screws through the proper holes in the carrier and into the drive or
adapter.
• Use the screws supplied with the VTrak or the SAS-to-SATA adapter.
• Install four screws per drive.
• Install the correct screws for the drive.
• Install two screws per adapter.
• Snug each screw. Be careful not to over tighten.
6. Reinstall the drive carrier into the VTrak enclosure.
3.5-inch SATA drive mounting holes (two each side)
3.5-inch SAS drive mounting holes (two each side)
Proper drive installation ensures adequate grounding and
minimizes vibration. Always attach the drive to the carrier with four
screws.
drive carrier handle
Important
10