Promise Technology SUPERTRAK EX8760T Guia De Inicio Rapido página 11

11. Highlight Next Step and press Enter.
The Create Logical Drive Step 2/2 screen appears.
12. On the Logical Drive Step 2/2 screen, take the following action as needed:
• Optional. Press the arrow keys to highlight Logical Drive Name. Type a
name for your logical drive and press Enter.
• To change the RAID Level, highlight RAID Level and press Enter.
In the popup menu, highlight your choice of RAID Level and press Enter.
The available RAID Levels depend on the number of physical drives you
selected for your disk array.
By default, the logical drive uses the full physical drive capacity.
• To use less than the full capacity for this logical drive, highlight Capacity
and press Enter.
Press the Delete or Backspace keys to erase the current capacity. Type
the new capacity in GB to allocate to this logical drive.
Later, you can assign the unused capacity to a second logical drive.
• To change the Stripe Size, highlight Stripe Size and press Enter.
Highlight your choice of 64 KB, 128 KB, 256 KB, 512 KB, or 1024 KB
and press Enter.
In the SuperBuild utility, sector size is set to 512 bytes. To choose a different
sector size, use WebPAM PRO to create your logical drive.
Task 4: Creating a Logical Drive
11