Troubleshoot - DR.BEI GF3 Manual De Instrucciones

f. Charge
Power Indicator
* CAUTIONS FOR CHARGING:
1. Before charging, plug the smaller end of the cord into the USB port, and plug the other end into an
CE/ETL/KC/PSE, etc. approved 5V DC 1A adapter (to be purchased separately);
2. The product is designed with charging protection where charging gets stopped when the battery is 100%
charged. Please do not keep charging the battery for longer time as it will affect the lifespan of the battery
adversely due to natural drain and repeated charging;
3. The product cannot be used when it is charging.
III. Specifications
Product Name
Model
Rated Voltage
Rated Power
Water flosser
IP Rating
Charging Time
Rated Input
Place of Origin
IV. Troubleshoot
Malfunctions
The product does not
operate even when the
switch is turned on.
The water pressure is
low.
The indicator is abnormal
or does not light up.
The product does not
indicate charging even
when the cord is
connected.
USB Port
When the product is in use, the power indicator is on:
Green LED shows battery level between 20%-100%;
Orange LED shows, battery level between 10%-20%;
Red LED, battery level less than 10%;
When the product is being charged, the power indicator is winking:
Red LED, shows battery level less than 10%;
Orange LED shows battery level between 10%-20%;
Green LED shows, battery level between 20%-100%;
When the product is 100% charged, the indicator is in solid green.
DR.BEI Portable Water Flosser
DR.BEI GF3
3.7V DC
5W
IPX7
Full recharge takes at least 4 hours
5V DC 1A
China
Causes
The battery power is low,
or the battery is empty or
being charged.
The nozzle is clogged or
damaged.
There is a circuit fault.
The plug is not properly
inserted into the electric
outlet.
Solutions
Charge the battery or
remove the product from
the charger.
Replace the nozzle.
Return the product to the
after-sales service center.
Check if the electric
outlet is connected
properly.
13