Connecting Usb Devices - Toshiba dynadock U3.0 Guía De Usuario

24
Setting Up the dynadock™ and Connecting Peripherals
Use this port:
5.1 Channel audio output
ports
* To use the 5.1 Channel surround sound function, connect the
cable for the audio equipment such as home stereos or speakers to
the 5.1 Channel audio output ports. (See
on page 31
NOTE
NOTE

Connecting USB devices

The dynadock™ provides four USB 3.0 ports and two USB 2.0
ports to connect peripheral devices to: two USB 3.0 ports and two
USB 2.0 ports on the back and two USB 3.0 ports on the front.
This section provides basic instructions for connecting most USB
devices to the dynadock™. Please check the documentation that
came with your USB device for any special instructions.
NOTE
for more information.)
If there is no audio device connected to the dynadock™, the
computer's audio ports may remain enabled.
If you make any changes to your audio settings, audio ports and the
dynadock, you may need to restart your media player for those
changes to take effect.
You do not need to turn off the dynadock™ or the docked computer
before connecting a USB device.
Audio Device:
Home stereos/speakers
"Adjusting audio settings"
Activity:
Surround sound
function *