Removing The Rechargeable Battery - Philips BG2038 Manual De Usuario

removing the rechargeable battery

1 Take the appliance out of the charging stand and let the motor run
until the battery is completely empty.
2 Insert a flathead screwdriver into the slot at the bottom of the
handle and turn it to unlock the rear panel of the housing.
3 Remove the rear panel of the housing and then remove the side
panels.
4 Undo the screws that connect the inner body of the appliance to
the front panel of the housing and separate the inner body from the
front panel.
5 Turn over the inner body. Then detach the cover of the inner body
with the control panel from the inner body.
6 Lift the printed-circuit board out of the inner body, turn it over and
cut the wires that connect the battery to the power unit.
EnGlish
11