Philips 32PW9520/12 Manual De Instrucciones página 8

Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.The TV automatically switches to
the best surround sound mode when
is switched
Surround
Set/Change code
The Child lock feature (see TV, Features, p. 11)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
& Select
Set/Change code
é
If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code
instructions on screen.
Source
Source
Setup
EXT1
EXT2
EXT3
SIDE
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
Decoder
Decoder
Setup
Programme
Status
If a decoder or a descrambler is connected, see
p. 15, you can define one or more programme
numbers as decoder programme numbers.
&
Select Decoder with the cursor right.
é Select .
Programme
8
Auto
.
On
.
. Follow the
Important:You have forgotten your code !
&
Select
Change code
press .
OK
é Press the cursor right and enter the overriding
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 3, and
when you press the v key on the remote
control.
"
Select the programme number under which
you have stored the programme coming from
your decoder.
' Select .
Status
• Select the input used to connect your
decoder: None ,
EXT1
• Select if you do not want the selected
None
programme number being activated as a
decoder programme number.
Note: Select when the decoder is connected
EXT2
to your EasyLink video recorder.
in the General menu and
or .
EXT2