Installation; Standard Installation - Tripp-Lite B118-008E-UHD-2 Manual Del Propietário

Installation

Standard Installation:

Notes:
• When connecting monitors that support different maximum resolutions, the video
resolutions displayed will be limited to the lowest maximum resolution. For example,
if connecting a combination of 1080p and 4K x 2K monitors, a 1080p resolution
will be displayed on all screens.
• For best results, the length of the HDMI cable(s) connecting the source to the
splitter or splitter to the monitors must not exceed 6 ft. (2 m) for 4K x 2K and
16 ft. (5 m) for 1080p resolutions. Tripp Lite's P569-XXX-CERT HDMI 2.0 cables
are recommended.
1. Make sure the power to all devices you will be connecting is turned off.
2. Connect your HDMI source (for example, Blu-ray™ player or cable receiver)
to the port labeled Input on the splitter.
3. Connect an available Output port (ex. HDMI 1) on the splitter to the HDMI
input port of your display (for example, monitor or TV).
4. Repeat Step 3 for the remaining Output ports on the splitter.
5. Connect the included power supply to the splitter, then connect the power
supply to an available AC outlet.
6. Turn on the power to all the devices in the application.
Source
4