Edid Management - Tripp-Lite B118-008E-UHD-2 Manual Del Propietário

EDID Management

A DIP switch is located on the front of the splitter, allowing for user definable
EDID settings. See the EDID Management Table section for the different user
adjustable settings.
Notes:
• The factory default setting is EDID mode MIX3. When in this mode, the lowest level
of video format of the connected monitors will be used.
• In order to retain EDID settings, "Copy Once" (Mode 13) must be performed prior to
making any changes.
EDID Management Table:
Mode 1
1 Down
2 Up
3 Down
4 Up
5 Down
6 Up
7 Down
8 Up
9 Down
10 Up
11 Down
12 Up
13 Down
14 Up
15 Down
16 Up
Copy Once: Read the EDID of the first connected output only
MIX1: Highest format of audio and lowest format of video
MIX2: Highest format of video
MIX3: Lowest format of video
2 3
Down Down Down
Down Down Down
Up Down Down
Up Down Down
Down Up Down
Down Up Down
Up Up Down
Up Up Down
Down Down
Down Down
Up Down
Up Down
Down Up
Down Up
Up Up
Up Up
6
4 EDID Information
4K @ 60 Hz 2-Channel
4K @ 60 Hz 7.1-Channel
4K @ 30 Hz 2-Channel
4K @ 30 Hz 7.1-Channel
1080p @ 60 Hz 2-Channel
1080p @ 60 Hz 7.1-Channel
1080i @ 60 Hz 2-Channel
1080i @ 60 Hz 7.1-Channel
Up 720p @ 60 Hz 2-Channel
Up 720p @ 60 Hz 7.1-Channel
Up 480p @ 60 Hz 2-Channel
Up 480p @ 60 Hz 7.1-Channel
Up Copy Once
Up MIX1
Up MIX2
Up MIX3