Warning Symbols; General Safety Instructions; Environmental Protection - Inspire Xena Instrucciones De Montaje, Utilización Y Mantenimiento

1. Warning symbols

FR
ES
PT
IT

2. General Safety Instructions

EL
Read this instruction manual thoroughly before using the appliance and save it for future reference
PL and if necessary pass the instruction manual on to a third party.
WARNING: When using electrical appliance, basic safety precautions should always
be followed to reduce the risk of fire, electrical shock and personal injury.
UA
1) General
Keep device out of reach of children and unauthorised persons.
RO
Check if the electrical specifications of this luminaire are compatible with your installation.
WARNNG: The power supply must be deactivated prior to assembly, maintenance,
EN
exchanging the bulb or cleaning processes. Remove the fuse or switch the fuse to
OFF and secure from reactivation.
Care must be taken before drilling fixing holes to avoid any existing wiring or pipework that may be
concealed.
For indoor use only.
2) Electrical safety
Luminaire should be installed by authorized electrician only according to national wiring rules.
3. Specific Safety Rules
No specific Safety Rules apply.

4. Environmental protection

CAUTION!
Read the instructions carefully.
Protection class I. This lamp has an earth terminal. The earth wire(yellow and
green) must be connected to the terminal indicated by the symbol.
Electrical products must not be thrown out with domestic waste. They must be taken
to a communal collecting point for environmentally friendly disposal in accordance
with local regulations. Contact your local authorities or stockist for advice on recycling.
The packaging material is recyclable. Dispose of the packaging in an environmentally
friendly manner and make it available for the recyclable material collection-service.
23