Beko ADV5810 Manual Del Usuario página 33

at the previously set speed.
To deactivate the intense speed, before the pre-set time,
press any key except the F key for ON/OFF Lights.
Attention! Some models only work up to the 3rd speed
and, therefore, do not have the intense function.
E = ON/OFF LIGHTS key
• S aturation Active carbon/Anti-grease filters:
- When the hood is on the LED corresponding to the A and
B keys flash, the anti-grease filters must be washed.
Once the clean filter is put back the electronic memory
must be reset, with the hood off press A for 5 sec. , the
reset is confirmed by a flashing of the LED A and B.
- When the hood is on the LED corresponding to C and E
flash, the carbon filters must be washed.
Once the clean filter is put back the electronic memory
must be reset, with the hood off press A for 5 sec. , the
reset is confirmed by a flashing of the LED C and E.
THE MANUFACTURER DECLINES ALL RESPONSIBIL-
ITY FOR EVENTUAL DAMAGES CAUSED BY BREACH-
ING THE ABOVE WARNINGS.
- 31 -