Fuel Filter; Cleaning The Air Filter - Timberpro BLO-200 Manual Del Usuario

Follow the instructions and recommended
maintenance schedule in the manual:
Operation
Every 2 fuel fills
Air Filter •
Filter Fuel
Spark plug
Cylinder fins

8.1.1. CLEANING THE AIR FILTER

Obstruction of the air filter will cause engine problems. Check
and clean it regularly. If you observe damage or changes,
replace it with a new filter.
1. Open the filter cover.
2. Remove the filter.
3. You can clean the outside of the filter by banging it
against a hard surface.
4. Clean the air filter with lukewarm water and mild soap.
5. Rinse the filter well with clean water.
6. Let the filter dry.
7. When the filter is dry, moisten it with two drops of oil (If you
moisten it too much, the machine may not start.)
8. Reinstall the filter.
9. Replace the cover.
Note: The engine will not work without the air filter installed.
Every 10 fuel fills Once per year
•
•
•

8.1.2. FUEL FILTER

The fuel tank has a filter. Thi The fuel tank has a filter. This part is located at the end of the fuel
the fuel hose and can be remo
hose and can be removed using a wire in the shape of a crochet
hook, or another similar method. other sim
Periodically check the fuel filter. Periodically check the fuel filt
Obstruction of the filter makes start ing more difficult or produces engine
ction of t
malfunctions.
When the fuel filter is dirty, re When the fuel filter is dirty, replace it.
If necessary you can clean the interior of the fuel filter with fuel. he interior of the fuel fil
8.1.3. CHECK THE SPARK PLUG
CHECK THE SPARK P
Frequently, starting or ignition problems are caused by a dirty spark
spark plug. Clean the spark pl plug. Clean the spark plug and check that the spacing of the electrodes
are spaced correctly (0.6 - 0.74 mm).
8.1.4. CLEANING THE CYLINDER
CLEANING THE CYLI
The fins of the cylinder are responsible for cooling off the cylinder through
The fins of the cylinder are res
contact with the air. The fins should always be clean! cylinder through contact with t
Dirty fins overheat the engine, which may end up seizing.
Dirty fins overheat th
seizing. Regularly check and
Regularly check and clean the fins.
14/109
English
art is located at the end of
d using a wire in the shape of
r method.
Do not allow dust to enter the fuel tank. Do not al
filter
m nctions.
ce it.
G
oblems are caused by a dirty
and check that the spacing of
corr tly (0.6
ER
nsible for cooling off the
air.
an the fins of the air filter.