Publicidad
Idiomas disponibles
Idiomas disponibles
Kit Preparation
1. Install the hazard button and display previously removed from the factory
radio panel.
2. Attach the four included panel clips to the radio panel. (Figure A)
Continue to kit assembly
White
plastic
clips
(Figure A)
99-7344
ISO DIN radio provision with pocket
1. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Mount the pocket to the double
DIN brackets using the (4) supplied
screws. (Figure A)
White
plastic
3. Mount the radio to the doble
clips
DIN brackets/pocket assembly with
the supplied (4) screws. (Figure A)
4. Mount the radio/bracket assembly
into the dash. (Figure B)
5. Snap the radio trim plate over
the radio/bracket assembly and
reassemble dash in reverse order of
disassembly. (Figure C)
(Figure A)
3
Kit Assembly
(Figure B)
(Figure C)
Publicidad
