Care And Maintenance - Joie muze Manual De Instrucciones

Ocultar thumbs Ver también para muze:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
!
If the rain cover is on the stroller, always remove rain cover to prevent ripping and tearing.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
!
When using your stroller at the beach, completely clean you stroller after use to remove sand and salt from
mechanisms and wheel assemblies.
Use Mosquito Net
Cover the stroller with the mosquito net. Follow the steps below to secure the mosquito net.
1. Attach the elastic strap to the hook on the back of the plastic.
2. Wrap bottom edge of the footrest and then stick the Velcro
3. Repeat steps above to secure mosquito net to opposite side.
The assembled mosquito net is shown as
.
28
Use Parent Tray
To assemble the parent tray, attach the parent tray to the parent tray mounts on both sides of the handle.
!
Do not place any item that may do harm to the baby and stroller in the parent tray.
!
The maximum recommended weight of the parent tray is 1.36kg/3lbs.
Use Rotating Child's Tray
Align the rotating child's tray end with matching component, and then push down to assemble.
The rotating child's tray can be pulled up on both left and right sides.
To open the rotating child's tray, press rotating child's tray release button
- 2
child's tray.
31
Use Armbar
Align the armbar end with matching component, and then push down to assemble.
The armbar can be pulled up on both left and right sides.
To open the armbar, press armbar release button
Tip
Armbar can be open for easily placing and removing child.

Care and Maintenance

1. Removable seat pad may be washed in cold water and drip-dried. No bleach.
2. To clean stroller frame﹐ use only household soap and warm water. No bleach or detergent.
3. From time to time check your stroller for loose screws﹐ worn parts﹐ torn material or stitching. Replace or
repair the parts as needed.
4. Excessive exposure to sun or heat could cause fading or warping of parts.
5. If stroller becomes wet﹐ open hood and allow to dry thoroughly before storing.
6. If wheels squeak﹐ use a light oil (e.g.﹐ Silicon Spray﹐ antirust oil﹐ or sewing machine oil). It is important to get
the oil into the axle and wheel assembly.
1
7. When using your stroller at the beach﹐ completely clean your stroller after use to remove sand and salt from
mechanisms and wheel assemblies.
15
- 1
28
- 2
.
®
28
30 32
- 1
31
, and then pull up the rotating
33 35
- 1
- 2
, and then pull up the armbar.
34
34
29
16

Publicidad

Tabla de contenido
loading

Tabla de contenido