Chauvet DJ SlimSTRIP UV-9 Guía De Referencia Rápida página 3

SlimSTRIP™ UV-9 QRG
To Begin
Description
Overview
AC Power
Power Linking
Fuse Replacement
Carefully unpack the product and check that all the parts are in the package, and are
in good condition.
If the box, or any of the contents, appear damaged from shipping, or show signs of
mishandling, save all packaging and file a claim with the carrier immediately, do not
notify Chauvet. Failure to report damage to the carrier immediately, or failure to have
all packaging available for inspection, could invalidate your claim.
For other issues, such as missing components or parts, damage not related to
shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
For information on contacting Chauvet, see
The SlimSTRIP™ UV-9 is a high-output ultraviolet wash product. It is an
eco-friendly replacement for standard 18-inch fluorescent tubes. Because the
SlimSTRIP™ UV-9 is ready to use right out of the box, setup is quick. You will also
save time when running extension cords to power link multiple units. The SlimSTRIP™
UV-9 easily transports in the CHS-60 VIP Gear Bag available from Chauvet, and it
works with the CBB-6 to attach multiple units together.
Fuse Holder
Power In
Length
22.3 in (565 mm)
SlimSTRIP™ UV-9 has an auto-ranging power supply that works with a voltage
range of 100–240 VAC, 50/60 Hz.
Power and current:
·
21 W, 0.2 A at 120 V, 60 Hz
·
19 W, 0.1 A at 230 V, 50 Hz
You can power link up to 44 SlimSTRIP™ UV-9 units on 120 V, or up to 80 units
on 230 V. You should never exceed this number.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating (T 1 A, 250 V).
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
Contact Us
Power Switch
LED (9)
Width
2.4 in (60 mm)
3
at the end of this QRG.
Safety Loop
Power Out
Back Panel View
Front View
Height
5.1 in (129 mm)
EN