Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly or operation of product,
make sure all parts are present. Compare parts with
package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate
the product. Contact Customer Care for replacement
parts.
• Estimated Assembly Time: 20 minutes
• Tools required for assembly: Hacksaw
OPERATION INSTRUCTIONS
For maximum water flow, it is
recommended that the largest
tubing size for your pump is used.
If using 3/4 in. ID tubing, skip to
step 2.
Step 1. If using 1 in. ID tubing,
trim the tubing adapter using a
hacksaw at the location indicated.
Step 2. Place the tubing adapter
on the lower hole of the tank and
use a gasket for it to be sealed
tightly when fastened.
Hand-tighten the locking ring on
the inside the tank to secure the
tubing adapter in place.
Step 3. Place the bio-balls in
the bottom of the tank.
Step 4. Place the fine (blue)
filter pad inside the tank. Then
place the coarse (black) filter
pad inside the tank.
Step 5. Place the tubing
adapter on the upper hole of
the tank and use a gasket for
it to be sealed tightly when
fastened.
Place the small adapter and
small gasket inside the tank
and hand-tighten the locking
ring to secure everything in
place.
4
1
Cut ring
2
3
1 in. ID
Tubing
4
5
Publicidad
