Care And Cleaning; Replacement Parts - allen+roth 2694674 Manual Del Usuario

OPERATING INSTRUCTIONS
Turn on wall switch to turn light and defogger pad on.
NOTE: The defogger pad will only work when light is on. The defogger pad and light cannot
be wired separately.
1. Touch the sensor button to turn ON the light.
2. Touch and hold the sensor button to dim the light. Release the button when the light
reaches the desired brightness setting.
3. When the LED gets to the maximum or minimum brightness setting, it will stop. Release,
then press and hold the button to go in the opposite direction, where it will stop at the
maximum or minimum brightness setting.
4. Touch the sensor button to turn OFF the light.
NOTE: The mirror is equipped with a memory feature to preserve the previous brightness
setting, when turning the light back on.

CARE AND CLEANING

Clean periodically with a soft cloth and glass cleaner. Avoid spraying glass cleaner directly onto mirror. Avoid abrasive
cleaners and harsh chemicals as they may damage the surface of the product.
ROUGH-IN

REPLACEMENT PARTS

PART DESCRIPTION
1 Mounting screw (set of 3)
2 Drywall anchor (set of 3)
3 Wire connector (set of 3)
4
1-3/4"
5-1/2"
Z-bar
11"
5-1/2"
PART #
MP-001A
MP-005
MP-006
MP-009
5
3
1
2
4