Periodic Maintenance - TRC 1000 Guia De Inicio Rapido

Periodic Maintenance

Proper operation of your TRC-1000 can be maintained by periodic cleaning, lubrication
and adjustment of the Cutting Unit.
Linear Shafts/Bushings and Air Cylinder shafts should be kept clean of dust, lent and
other foreign substances. These points should also be lubricated periodically with a light
weight oil, such as sewing machine oil.
Keep Drive and Tension Rollers clean of foreign matter. Proper spring tension is also
important to machine accuracy. Too much pressure causes excessive drag, and too little
will cause material slippage.
Drive Belt and Pulleys should be checked for slippage and looseness.
The Cutting Blade and Groove on the Cutting Plate should be scraped clean.
Periodically check all screws for loosening.