Uline OHAUS RANGER 7000 Manual Del Usuario página 25

4. Weigh, or input manually, the original sample as
Start Weight if needed. (See Figure 79)
Figure 79
NOTE: This screen will not show if Start Weight is
chosen for calculation in Configuration.
5. Add Start Weight and press the button
corresponding to the
6. Alternatively, press the button corresponding to the
icon. A numeric input screen appears. Key in
the Start Weight, then press the button corresponding
to the icon. (See Figure 80)
Figure 80
7. Remove the original weight for processing or
shaking. (See Figure 81)
Figure 81
PAGE 25 OF 105
OPERATION CONTINUED
icon.
8. After processing or shaking is completed, press the
button corresponding to the
sieve analysis. (See Figure 82)
Figure 82
9. Place container on pan. The scale will then perform
an auto tare.
NOTE: Press the button corresponding to the
icon to cancel current process if needed.
(See Figure 83)
Figure 83
10. Empty sieve contents into container and press the
button corresponding to the
Figure 84
11. After all sieves have been weighed, the result screen
will be displayed. (See Figure 85)
Figure 85
icon to begin
icon. (See Figure 84)
0721 IH-7991