Uline OHAUS RANGER 7000 Manual Del Usuario página 29

SERIAL COMMUNICATION AND COMPUTER/PRINTER SETUP CONTINUED
MT-SICS COMMANDS
LEVEL COMMAND
LEVEL 0
LEVEL 1
DW
TAC
LEVEL 2
I1O
P100
P101
P102
SIRU
SNR
SNRU
SRU
PAGE 29 OF 105
@ Reset the scale.
I0 Inquiry of all available SICS commands.
I1 Inquiry of SICS level and SICS versions.
I2 Inquiry of scale data.
I3 Inquiry of scale software version.
I4 Inquiry of serial number.
S Send stable weight value.
SI Send weight value immediately.
SIR Send weight value repeatedly.
Z Zero the scale.
ZI Zero immediately.
D Write text into display.
Weight display.
SR Send and repeat stable weight value.
T Tare.
TA Tare Value.
Clear Tare.
TI Tare Immediately.
C2 Calibrate with the external calibration weight.
C3 Calibrate with the internal calibration weight.
Inquire or set scale ID.
I11 Inquire of scale type.
Print out on the printer.
Print out stable weight value.
Print out current weight value immediately.
Send weight value in the current unit immediately and repeat.
SIU Send weight value in the current unit immediately.
Send stable weight value and repeat after every weight change.
Send stable weight value in the current unit and repeat after every weight change.
Send weight value in the current unit and repeat.
ST After pressing the Transfer key, send the stable weight value.
SU Send stable weight value in the current unit.
FUNCTION
0721 IH-7991