Safety Information; Status Indicators - SICK mac4 Instrucciones De Montaje

1

Safety information

2 Sender and receiver
3

Status indicators

4 Mounting
8019678/2016-04-07 | SICK
Subject to change without notice
All rights reserved. Subject to change without notice.
DANGER
Hazard due to lack of effectiveness of the protective device
In the case of non-compliance, it is possible that the dangerous state of the machine
may not be stopped or not stopped in a timely manner.
Please observe the safety notes provided.
b
Among others, the mac4 safety light curtain is not suitable for the following applica‐
tions:
• Outdoors
• Under water
• In explosive environments
• In areas with flying sparks
For more information about how to work with the protective device, refer to the machi‐
nery documentation or the operating instructions for the protective device. You can call
up the EU declaration of conformity and the current operating instructions for the pro‐
tective device by entering the part number in the search field at
number: see the type label entry in the "Ident. no." field).
The symbol indicates the sender.

The symbol indicates the receiver.

Complete overview of the LED statuses and their meanings: see operating instructions.
Base module indicators
Position of LEDs: A1
No LED color
1 Red/green
2 White
3 Red
Table 3: Base module indicators
Combine modules
Connect modules: B1
Release modules: B2
Mounting instructions
Put the modules together in a clean environment.
b
The end with the cable connection must point in the same direction for the sender
b
and receiver.
MOUNTING INSTRUCTIONS
www.sick.com
Indicator Labeling
OSSD status indicator OSSD
Communication COM
Fault indicator ERR
M O N T A G E A N L E I T U N G | mac4
(part
7