Fig. 4: L400 Sensor With Radial Optics, Beam Axis 90; Fig. 5: L4000 Sensor With Axial Optics, Centre Line Corresponds To Beam Axis - SICK L4000 Instrucciones De Operación

en
Chapter 3
Fig. 4: L400 sensor with
radial optics, beam axis
90°
Fig. 5: L4000 sensor with
axial optics, centre line
corresponds to beam axis

WARNING
72  SICK AG • Industrial Safety Systems • Germany • All rights reserved
Product description
The sensors use a visible red light.
When the light beam is not interrupted, the output is "0 V", when the
beam is interrupted "+24 V".
L400 and L4000 are only allowed to be operated as safety
photoelectric switches with the safety evaluation device UE401.
Operating Instructions
L4000 system
8010009/YTA2/2016-05-02
Subject to change without notice