4. DISCRIPTIONS
6
7
4
8
1
3
ON/OFF FOOTSWITCH
1
This footswitch turns the pedal either on or off. When you push down on the switch while the pedal
is off it will turn it on. If you push down on the switch while the pedal is on it will turn off. This is a
true bypass footswitch.
TAXI/TAKEOFF FOOTSWITCH
2
This footswitch switches between the TAXI and TAKEOFF modes. Each time you push the
footswitch you switch between TAXI or TAKEOFF mode.
9
5
10
- Flange and chorus effects can be produced in TAXI mode.
- A continuous sweeping oscillation effect is produced in TAKEOFF mode. The effect is applied to
the sound that is being produced at the time TAKEOFF mode is turned on.
NOTES FROM PAUL GILBERT:
In the TAKEOFF mode, the AIRPLANE FLANGER is preset to go crazy! The flanger effect will
take over the guitar sound and give you effects similar to a whammy-bar divebomb. I usually set
the speed knob at ..
LED INDICATOR
3
The LED indicator comes on when the effect is turned on.
TAXI LED INDICATOR
4
The TAXI LED indicator comes on when the TAXI mode is turned on.
TAKEOFF LED INDICATOR
5
The TAKEOFF LED indicator comes on when the TAKEOFF mode is turned on.
MANUAL
6
Change the delay time with the MANUAL control. Turn the knob to the right to shorten the delay
time and increase the emphasized range.
A flange effect is produced as you turn the knob to the right and a chorus effect is produced as
you turn the knob to the left.
SPEED (TAXI)
7
SPEED (TAXI) lets you control the flanger speed. Turn the knob to the right to increase the flanger
speed.
2
RANGE
8
Change the oscillation range with the RANGE control. Turn the knob to the right to increase the
oscillation depth.
ENHANCE
9
Control the feedback volume with ENHANCE. Turn the knob to the right to increase the feedback
volume and punch.
SPEED (TAKEOFF)
10
SPEED (TAKEOFF) lets you control the flanger speed of the feedback modulation. Turn the knob
to the right to increase the flanger speed of the feedback modulation.
- -