3.4 Microphone
1.- Grill
Protects the microphone cartridge and helps reduce
"breathy" and wind noise pick-up.
2.- Power switch
Used to turn the microphone power ON and OFF.
The mic power is ON when the switch is in the ON
position and the power is OFF when the switch is in
the OFF position.
3.- Battery compartment
Allows you to place AA batteries.
4. BATTERY INSTALLATION
12
1. On the microphone, remove the cover by
turning it counter clockwise until it snaps.
2. Insert two new AA batteries. Make sure the
batteries are inserted with the correct polarity.
3. Replace the battery compartment cover by
turning in clockwise until firm.