Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for part 99-3016G
Chevy Colorado, GMC Canyon 2015-up
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted gunmetal gray
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8" Phillips pan-head screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • GMOS-LAN-09 • LC-GMRC-LAN-09 • AX-LCD
Antenna Adapter: • 40-EU55
METRA. The World's best kits.
(Sub-dash modifications required)
99-3016G
C
™
D
metraonline.com
Table of Contents
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
TOOLS REQUIRED
• Cutting tool • Panel removal tool
• Phillips screwdriver • Socket wrench
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-3016G
Resumen de contenidos para Metra 99-3016G
- Página 1 • A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips pan-head screws • Phillips screwdriver • Socket wrench CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation, unless the vehicle manufacturer recommends against so.
-
Página 2: Dash Disassembly
99-3016G Dash Disassembly Kit Preparation 1. Unclip and remove the trim panel 1. Cut and remove the specified surrounding the radio/climate areas in the sub dash. (Figure A) control panel. (Figure A) Continue to kit assembly 2. Remove (4) 9/32” screws securing the radio/climate control panel. -
Página 3: Kit Assembly
6. Clip the climate control vents into the radio trim panel assembly. 7. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 8. Reassemble the dash in the reverse... -
Página 4: Important
Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits. metraonline.com ™ © COPYRIGHT 2015 METRA ELECTRONICS CORPORATION... -
Página 5: Chevy Colorado, Gmc Canyon 2015 Y Mas
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3016G Indice Chevy Colorado, GMC Canyon 2015 y mas (Se requieren modificaciones al sub tablero) Desmontaje del tablero ..........99-3016G Preparación del kit ..........2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 CARACTERÍSTICAS DEL KIT... -
Página 6: Desmontaje Del Tablero
99-3016G Desmontaje del tablero Preparación del kit 1. Desenganche y quite el panel de 1. Corte y quite las áreas moldura que rodea el panel del especificadas en el sub tablero. radio/control del clima. (Figura A) (Figura A) 2. Quite los (4) tornillos de 9/32” que Continúe con el ensamble del kit... -
Página 7: Ensamble Del Kit
7. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. -
Página 8: Importante
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3016G IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones.