Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-3011S
Chevy Cruze 2011-up
KIT FEATURES
• ISO DIN head unit provision with pocket
• DDIN head unit provisions
• Painted Silver to match factory finish
KIT COMPONENTS
• A) Radio Trim Panel • B) Radio Brackets • C) Pocket • D) (4) #8 x 3/8" screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Wire harness: GMOS-044 2011-up GM amplified and non-amplified Interface
Note: The GMOS-044 will be necessary to retain the center dash display information
Antenna Adapter: • 40-EU55 European antenna adapter 2006-up
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket Wrench
METRA. The World's best kits.
APPLICATIONS
99-3011S
C
™
1-800-221-0932
D
metraonline.com
Table of Contents
Dash Disassembly
– Chevy Cruze 2011-up .......................................... 2
Kit Assembly
– ISO DIN head unit provision with pocket ............... 3
– DDIN head unit provisions .................................... 3
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Publicidad
Tabla de contenido
Manuales relacionados para Metra 99-3011S
Resumen de contenidos para Metra 99-3011S
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-3011S APPLICATIONS Table of Contents Chevy Cruze 2011-up 99-3011S Dash Disassembly – Chevy Cruze 2011-up .......... 2 Kit Assembly – ISO DIN head unit provision with pocket ....3 KIT FEATURES • ISO DIN head unit provision with pocket –...
-
Página 2: Dash Disassembly
(Figure D) location on radio trim panel of 5. Remove (2) 9/32” screws from the 99-3011S. (Figure A) radio control panel. Disconnect the 2. Using a panel removal tool, gently radio control panel. (Figure E) -
Página 3: Kit Assembly
(Figure A) 2. Attach radio mounting brackets to 2. Locate the factory wiring harness ISO holes in radio chassis using in the dash. Metra recommends the screws supplied with the radio. using the proper mating adapter (Figure A) from Metra or AXXESS. - Página 4 INSTALLATION INSTRUCTIONS FOR PART 99-3011S NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
-
Página 5: Herramientas Requeridas
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3011S AplicAciones Indice Chevy Kruse 2011y mas 99-3011S Desmontaje del tablero – Chevy Kruse 2001 y mas ........2 Ensamble del kit – Provisiones de unidad central ISO DIN con bolsillo ... 3 cArActerísticAs del kit •... -
Página 6: Desmontaje Del Tablero
99-3011S Desmontaje del tablero 1. Usando una herramienta para 4. Quite los (4) tornillos de 9/32” del quitar paneles, quite con cuidado panel de control de accesorios. el panel de la carcasa de arriba de Jale con cuidado los bordes del la moldura/rejilla del tablero. -
Página 7: Ensamble Del Kit
ISO del chasís en el tablero. Metra recomienda del radio. (Figura A) el uso de adaptadores adecuados de acoplamiento de Metra y/o de 3. Ubique el arnés de cables de AXXESS. (Figure A) (Figure A) fábrica y el conector de la antena... - Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3011S EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.