ASROCK FM2A58+ BTC Manual Del Usuario página 25

Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.1 No. 15)
Power LED Header
(3-pin PLED1)
(see p.1 No. 14)
Chassis and Power Fan
Connectors
(4-pin CHA_FAN1)
(see p.1 No. 21)
(3-pin CHA_FAN2)
(see p.1 No. 7)
(3-pin CHA_FAN3)
(see p.1 No. 13)
(3-pin PWR_FAN1)
(see p.1 No. 20)
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1 No. 2)
(3-pin CPU_FAN2)
(see p.1, No. 3)
24
DUMMY SPEAKER
1
+5V DUMMY
1
PLED-
PLED+
PLED+
FAN_SPEED_CONTROL
CHA_FAN_SPEED
+12V
GND
GND
+ 12V
CHA_ FAN_SPEED
FAN_SPEED_CONTROL
CPU_FAN_SPEED
+12V
GND
1 2 3 4
GND
+12V
CPU_FAN_SPEED
Please connect the chassis
speaker to this header.
Please connect the chassis
power LED to this header to
indicate system power status.
The LED is on when the system
is operating. The LED keeps
blinking in S1 state. The LED is
off in S3/S4 state or S5 state
(power off).
Please connect the fan cable
to the fan connector and
match the black wire to the
ground pin.
Please connect the CPU fan
cable to the connector and
match the black wire to the
ground pin.