Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. DO NOT use fan in window, rain may create electrical
hazard.
5. Household use only.
PART FIGURE
1.
Spray cap
2.
Corrugated hose
3.
Front guard
4.
Screw (ST3*7.5)
5.
Net clamp
6.
Blade nut
7.
Blade
8.
Guard nut
9.
Rear guard
10.
Motor assy
11.
Tightening knob
12.
Host assy
13.
Base assy
14. Caster (Universal wheel)
15. Screw (M5*20)
16. Water tank assy
17. Spring clamp
18. Drain plug
INSTALLATION METHOD
1.
Assembly of host
Take out the motor assy and host
assy from the package,as is shown
in Figure 1,insert the connecting wire
and the column into the host,then
tighten the fastening knob and
ensure to drive the screw into the
positioning hole.
2. Mounting the casters
Take out the base and casters
from the package, as is shown in
Figure 2, and press the casters
into the base mounting hole.
3. Mounting the base in the host
As is shown in Figure 3, put 3 screws
(M5 * 20) through the base, and fix the
base host in the nuts embedded in the
host bottom.
FS40-13QRA.indd 21
Note: All the pictures in this manual are for
explanation purpose only. Any discrepancy between
the real object and the illustration in the drawing
shall be subject to the real subject.
21
1/5/2017 10:53:20 AM
Publicidad
Tabla de contenido
