WATERLOO HYPER TOUGH Manual De Usuario página 4

REMovING AND INStALLING SLIDES
• To remove the slide from the unit, first remove the
drawer.
• After removing the drawer, check to see if the unit has
rivets located on the front of the slide. To drill out rivets,
use a 5/32-in drill bit. The rivets will need to be replaced
with 5/32-in rivets.
• To reinstall the slide in the appropriate position in the
unit, align front and back lances with mounting holes in
the side of the unit. Pull towards the front of the unit and
downwards until rivet holes in slide line up with holes in
the unit. The rivets will need to be replaced with 5/32-in
rivets.
• For smooth operation, make sure the drawers are
matched with their original slides.
Drill out rivet
CHESt DRAWERS
• The top chest lid must be lifted open in order to access
drawers.
• All drawers must be closed before closing and locking
the lid to secure the product.
DRAWER DEtENt
• easy-gliding ball-bearing drawers are retained by a
detent in order to prevent drawers from opening on their
own. You may have to pull firmly to release the detent
and open drawers.
to LoCK CHESt
• Make sure drawers are fully closed.
• Close the cover and lock with the key.
to LoCK RoLLING CABINEt
• Make sure drawers are fully closed.
• Lock with the key.
4